At ACE GRAPHIX, we specialize in a diverse range of signage solutions, including illuminated lightboxes, lollipop signs, ACM (Aluminum Composite Material) signs, Corflute signs, and vehicle signage. Our commitment is to deliver high-quality installations that adhere to New Zealand’s safety and compliance standards.

Illuminated Signs (Lightboxes & Lollipop Signs)

Electrical Installation Requirements

• Certified Electrician: All electrical work must be performed by a certified and licensed electrician to comply with New Zealand’s electrical safety regulations.
• Installation Process:
  1. Pre-Installation: Your signage will be prepared and pre-wired for connection.
  2. Site Assessment: A certified electrician will assess the installation site to ensure suitability for electrical work.
  3. Installation: The electrician will install the signage, connect it to the mains power supply, and perform necessary safety checks.
  4. Certification: Upon completion, an Electrical Safety Certificate will be issued to confirm compliance with safety standards.

Electrician Services & Rates

• Standard Rate: $140 + GST per hour for the first hour.
• Subsequent Hours: $90 + GST per hour.

Please note: Additional charges may apply for extra power sockets or specialized connection cables, depending on the specific requirements of your installation.

ACM (Aluminum Composite Material) Signs
Installation Overview

• Mounting: ACM signs are typically mounted on walls or posts using screws or brackets.
• Considerations: Ensure the mounting surface is suitable for securing
  the sign.
• Durability: ACM signs are durable and suitable for both indoor and
  outdoor applications.

Installation Process

1. Site Assessment: Evaluate the mounting surface to ensure it can support the sign’s weight and dimensions.
2. Preparation: Mark the installation points and drill necessary holes.
3. Mounting: Secure the sign using appropriate fasteners.
4. Finishing: Check for level alignment and ensure all fixings are tight and secure.

Corflute Signs

Installation Overview

• Material: Corflute is a lightweight, durable polypropylene material suitable for temporary signage.
• Applications: Ideal for real estate signs, event signage, and
  promotional displays.
• Durability: Corflute signs are weather-resistant and can last up to two
  years outdoors.

Installation Process

1. Preparation: Ensure the sign is clean and free from debris.
2. Mounting Options:
   • Stakes: Insert stakes into the flutes of the corflute and place them into the ground.
   • Adhesive: Use double-sided tape or adhesive to attach the sign to a flat surface.
   • Hanging: Drill holes in the corflute and use zip ties or rope to hang
     the sign.

Vehicle Signage

Installation Overview

• Material: Vehicle signage is typically made from high-quality vinyl
  wraps or decals.
• Applications: Ideal for branding vehicles, trailers, and fleet signage.
• Durability: Properly applied vehicle signage can last several years,
  depending on exposure to elements.

Installation Process

1. Surface Preparation: Clean the vehicle’s surface thoroughly to
   remove dirt, grease, and wax.
2. Design Application: Align the vinyl graphics on the vehicle surface.
3. Adhesion: Apply the vinyl using a squeegee to remove air bubbles and
   ensure full adhesion.
4. Finishing: Trim any excess vinyl and inspect the application for
   smoothness and alignment.

General Customer Responsibilities

• Power Supply: Ensure a suitable power outlet is available near the installation site for illuminated signs.
• Permits: Obtain any necessary permits or approvals required by local authorities or property managers.
• Access: Provide clear access to the installation site for the installation team.
• Surface Preparation: For ACM, Corflute, and vehicle signage, ensure the mounting surface is clean and suitable for installation.

Pricing Transparency

• Signage Cost: The cost of the signage is separate from any installation or electrical fees.
• Installation Fees: Charged based on the complexity and time required for installation.
• Electrician Fees: For illuminated signs, electrical work is charged separately at the electrician’s standard rates.
• Invoicing: An itemized invoice will be provided, detailing the cost of signage and any additional services separately.

Why Choose ACE GRAPHIX?

• Qualified Professionals: We work with certified electricians and experienced installation teams who adhere to New Zealand’s safety standards.
• Comprehensive Services: From design to installation, we offer endto-end signage solutions.
• Quality Assurance: We ensure that all installations are performed to the highest standards of safety and quality.

For more information or to schedule an installation, please contact us at info@acegraphix.co.nz or 0226314036.